Generator guide
Perkins 1104A generator: making sense of the listed 60 kVA rating
NB Engineering’s catalogue lists a Perkins 1104A generator at 60 kVA / 48 kW. If that capacity is close to your requirement, use the rating to begin a conversation—not to skip the load calculation, configuration check or site assessment.
Map normal and emergency loads
List what the generator would supply during an outage and mark the order in which loads should return. Include motor-driven equipment and note any equipment that must not stop abruptly. Where possible, use measured demand or equipment nameplates rather than an estimate based on floor area.
A generator’s performance during a sudden load change can matter as much as its steady-state capacity. Ask a qualified electrical designer to review the largest motor start, combined loads, power factor and any sensitive equipment.
Confirm the exact 1104A configuration
The public catalogue gives a 60 kVA / 48 kW rating and identifies 1104A as the engine model. The alternator, control system, voltage, frequency, phase, rating duty and other configuration details should be verified on the datasheet for the specific unit being offered.
If you are comparing alternatives, compare like with like: the same duty basis, electrical output, included equipment and site conditions. Ask for written confirmation of availability, condition, warranty and delivery scope rather than relying on a general model description.
Include the site in the specification
Placement, ventilation, exhaust, fuel arrangements, noise expectations and safe transfer equipment can affect the project. If the generator must work with an existing ATS or distribution board, have the compatibility checked before purchase.
Share the site location, intended hours, load list and installation constraints with the supplier. These details help determine whether the listed 60 kVA class makes sense for your particular application.