Troubleshooting

Generator trouble? What to record before calling for repair

When a generator will not start—or starts and then trips—it is tempting to keep trying the start button. Pause first. Repeated attempts can make some faults worse. A few observations, recorded safely, can help a technician narrow down the issue without asking you to work on live equipment.

Record what happened

Note the model, serial number, run hours, alarm text or code, when the problem began, what was happening immediately before it, and whether anything changed at the site. Include whether the unit cranks, starts briefly, runs but produces no usable output, or trips under load.

If safe and visible without opening guards or electrical panels, note obvious leaks, smoke, unusual sounds or warning lamps. Take a photograph of the display if useful. Do not touch hot surfaces, moving parts, exposed conductors or spilled fuel.

Know when to stop

Stop operation and contact a qualified technician if there is smoke, fire, a fuel leak, severe vibration, unusual mechanical noise, repeated protective trips or any sign of electrical damage. Do not bypass an interlock, repeatedly reset a breaker or defeat an alarm to keep the set running.

A generator can involve dangerous voltage, hot exhaust, moving machinery and combustible fuel. Troubleshooting inside the equipment or making electrical connections is work for trained personnel with the right procedures and equipment.

Help the technician arrive prepared

Share the alarm, timeline, service records, recent repairs and whether the fault occurs at startup, at no load or only under load. Mention the connected ATS or control interface and any recent fuel, battery or wiring work.

Ask what access, isolation or shutdown arrangements are needed before the visit. After the repair, request a clear explanation of the fault, parts replaced and any follow-up test or maintenance action recommended.

Explore generator repair

Contact NB Engineering