Generator guide

Planning around the FG Wilson P110-3: a 110 kVA selection guide

The FG Wilson P110-3 is listed by NB Engineering as a diesel generator rated at 110 kVA / 88 kW. That gives buyers a useful model and capacity reference. To see whether it suits a real site, the load, duty and installation need to be considered together.

Match capacity to the actual operating plan

Begin with the loads the generator must support, and identify which ones are critical. Add the running demand, but do not stop there: large motors and other inductive loads can have substantial starting requirements. If loads will start sequentially, document the planned sequence and ask a qualified designer to review it.

A 110 kVA label does not mean every installation can use the same load mix. Confirm power factor, voltage, frequency, phase and rating conditions for the specific offered set, and account for any environmental derating stated by the manufacturer.

Confirm the equipment configuration

The public listing identifies the model, fuel type and headline rating; it does not specify every component or accessory. Ask for the current datasheet and written details of the engine and alternator configuration, controller, enclosure, breaker, included cabling or accessories, and warranty terms where relevant.

If this is a replacement project, compare the electrical interface and physical dimensions with the existing installation. A similar kVA rating does not guarantee drop-in compatibility with the old controls, switchgear, base or exhaust route.

Think about operation after delivery

Plan routine access, ventilation, exhaust, fuel management, safe electrical isolation and transfer between utility and generator supply. If automatic transfer is required, coordinate the ATS with the generator controls and site protection scheme.

Provide the supplier with the intended duty, load list, site conditions and installation constraints. It is a much better basis for a recommendation than selecting by model name alone.

View the FG Wilson P110-3 listing

Contact NB Engineering